Description
Typical applications
- Repair of surface defects on concrete, masonry, many natural stones and steel
- Application on horizontal and vertical incl. overhead areas
- Filling of blow holes, honeycombs and surface roughness
- Application thickness from feather-edge to 100 mm (4”)
- Re-modeling of architectural features requiring a moldable mortar that can be shaved into shape
Properties
- Minimal shrinkage/expansion under dry resp. wet curing conditions minimizing the risk of micro-cracking
- Excellent workability especially overhead
- Fiber reinforced
- 10 min. working time and 14 MPa (2030 psi) compressive strength after 2 hours
- Final strength of more than 50 MPa (7250 psi) after 28 days
- Open to foot traffic after 1-1 ½ hours
- Very good adhesion to properly prepared concrete and masonry
- Water curing only under hot and dry conditions required for 3 – 4 hours
